Sun Microsystems 806-2989-10 manual GigaSwift Ethernet Driver Operating Statistics

In the following example, the adv_autoneg_cap and adv_1000fdx_cap parameters are set for all Sun GigaSwift Ethernet devices. (See the driver.conf(4) man page for more information.)

adv_autoneg_cap=0 adv_1000fdx_cap=0

In the following example, the adv_autoneg_cap and adv_1000fdx_cap parameters are set for a single instance of the Sun GigaSwift Ethernet device.

name=pci108e,abba parent=pci@4,4000 unit address+4 adv_autoneg_cap=0 adv_1000fdx_cap=0;

3.Save the ce.conf file.

4.Save and close all files and programs, and exit the windowing system.

5.Shut down and reboot the system.

GigaSwift Ethernet Driver Operating Statistics

These statistics are part of the statistics presented by the netstat -kcommand.

TABLE 4-10describes the read-only Media Independent Interface (MII) capabilities. These parameters define the capabilities of the hardware. The Gigabit Media Independent Interface (GMII) supports all of the following capabilities.

TABLE 4-10Read-Only ce Device Capabilities

Parameter	Description (Local interface Capabilities)
cap_autoneg	0 = Not capable of autonegotiation
	1	= Autonegotiation capable
cap_1000fdx	Local interface full-duplex capability
	0	= Not 1000 Mbit/sec full-duplex capable
	1	= 1000 Mbit/sec full-duplex capable
cap_1000hdx	Local interface half-duplex capability
	0	= Not 1000 Mbit/sec half-duplex capable
	1	= 1000 Mbit/sec half-duplex capable

Chapter 4 Configuring Driver Parameters 39