Sun Microsystems 806-2989-10 manual View the .properties file for a list of device properties

4.View the .properties file for a list of device properties.

It might be difficult to tell if the devices on your network are GigaSwift Ethernet devices or other network interface cards. The .properties command displays the specific information about the installed adapter.

To make sure that the device you just installed is connected to the network, type:

ok .properties
assigned-addresses	82810010		00000000	00200000 00000000 00200000
	82810030		00000000	00400000 00000000 00100000
local-mac-address	08 00 20		e5 bf cf
phy-type	mif
max-frame-size	00 00 40		00
address-bits	00 00 00		30
compatible	70	63 69	31 30 38	65 2c 61 62 62	61 00 70 63	69
board-model	501-5902
model	SUNW,pci-ce
device_type	network
reg	00810000		00000000	00000000 00000000 00000000
	02810010		00000000	00000000 00000000 00200000
	02810030		00000000	00000000 00000000 00100000
name	network
version	1.10
fcode-rom-offset	00000000
66mhz-capable
fast-back-to-back
devsel-speed	00000002
class-code	00020000
interrupts	00000001
max-latency	00000040
min-grant	00000040
revision-id	00000001
device-id	0000abba
vendor-id	0000108e

Note –If you are going to set the local-mac-addressproperty, note the local-mac-addressof your device at this time. See “Setting the local-mac- address Property” on page 12 for more information.

Chapter 2 Installing the Adapter 11