Sunbeam BM7800 manual How to use the Time Delay, Power Interruption Program Protection

How to use the Time Delay.

The Quantum SmartBake allows you to delay the completion of your bread by up to 15 hours, so you can wake up to the smell of freshly baked bread, or go out for the day while your Quantum SmartBake does all the work.

Note: Do not use the Time Delay when the recipe has perishable ingredients such as milk, eggs or cheese, as these may spoil.

1.Follow steps 1 through to 4 on page 14.

2.Press the DELAY (+/-)button until you reach the number of hours and minutes that you want your bread to be ready.

3.Press the START/PAUSE button to begin the cycle. The Timer will start counting down and the Pre-Heat indicator will flash. The bread will be cooked and ready in the hours and minutes displayed on the LCD window.

Note: If you make a mistake, or need to reset the Timer, press the START/PAUSE button for

2-3 seconds.

Example

Before leaving for work at 8am, you decide to set the Time Delay so that the bread or selected program will be ready and completed by 6pm when you return home - which is 10 hours later.

After following instruction 1 above, press the DELAY +/- (▼/▲) button until the display reads 10.00. Then press START.

This tells you that your bread or selected program will be complete in 10 hours.

The Quantum SmartBake will begin counting down and your selected program will be complete by 6pm.

Note: You do not need to take into account the amount of time required to cook the program selected. This is automatically registered in the Quantum SmartBake when it is selected.

Power Interruption Program Protection.

Your Quantum SmartBake features a 10-30 minute Power Interruption Protection that protects the program memory in the advent of a black out or power surge.

This means that if there is a power interruption during your bread making, the machine will retain its memory for at least 10 minutes and continue cooking when the power supply returns. This feature is applicable whether the machine is in the Kneading, Baking, Rising or Delay cycle.

Without this feature the machine would reset and the breadmaking cycle would stop.

If you experience a power failure greater than 10 minutes you may need to discard your ingredients and start again.

Note: When the power fails the LCD screen may stay visable for some minutes and then fade out. This does not mean that your program has been lost.

Kneading	10 minutes
Baking	10 minutes
Rising	10 minutes
Delay	30 minutes

21