Program Setting Times and Display Information.
The LCD window will tell you if there is a problem with your Quantum SmartBake. Always use your Quantum SmartBake in a room free of drafts. Do
not use your Quantum SmartBake outdoors, near a heat vent or in direct sunlight.
DISPLAY READS | PROBLEM | SOLUTION | |
|
|
| |
“0:00” (:) flashing | Select program setting. | Use the Menu button to | |
|
| select program. | |
|
|
| |
“E:01” flashing | The baking chamber is too | Open the lid and remove | |
| hot to begin another cycle. | bread pan to cool the chamber. | |
|
| After the panel message | |
|
| disappears, put the bread pan | |
|
| back into the chamber and | |
|
| press START again. | |
|
|
| |
“E:02” flashing | Sensor malfunction. |
| |
|
|
| |
“E:03” flashing | Sensor malfunction. | Contact Customer Service | |
|
| ||
“E:04” flashing | CPU malfunction | ||
on the toll free number | |||
|
| 1800 025 059. | |
“E:05” flashing | Heater control malfunction. | ||
| |||
|
|
| |
“E:08” flashing | Heater control malfunction. |
| |
|
|
|
Note: After baking a loaf of bread, it is recommended to cool the breadmaker down to room temperature as temperatures above ambient reduce the rising height of the bread due to the sensitivity of yeast.
You will hear a beep when:
The power is turned ON | Long beep |
|
|
Select a setting from the Menu | Short beep |
|
|
Invalid | Long beep |
|
|
Commencement of baking cycle | 2 long beeps |
|
|
Completion of bread baking process | Short and Long beeps |
|
|
|
|
76