![](/images/new-backgrounds/1247219/24721983x1.webp)
Memory Support
The
Both interleaved and
Populating two adjacent slots at a time with memory modules of the same size and type will result in interleaved
Optimizing memory performance
If two processors are installed, it is better to stagger pairs of DIMMs across both sets of CPU DIMM slots, e.g. fi rst populate CPU1 slots 1A and 1B, then CPU2 slots 1A, and 1B, then the next two CPU1 slots, etc. This balances the load over both CPUs to optimize performance.
Maximum memory (two CPUs): 16 GB for
Figure 5-3a. Installing DIMM into Slot
Notch
Release
TabNote: Notch should align
with its receptive point on the slot
Notch
Release
Tab
To Install: Insert module vertically and press down until it snaps into place. Pay attention to
the bottom notch.
To Remove: Use your thumbs to gently push each release tab outward to free the DIMM from
the slot.