SUPER MICRO Computer AS1021M-82, AS1021M-T2 user manual Wake-On-LAN, Wake-On-Ring

AS1021M-T2/1021M-82 User's Manual

Wake-On-LAN

The Wake-On-LAN header is desig- nated JWOL. See the table on the right for pin defi nitions. You must have a LAN card with a Wake-On-LAN connector and cable to use the Wake- On-LAN feature.

(Note: Wake-On-LAN from S3, S4, S5 are supported by LAN1. LAN2 sup- ports Wake-On-LAN from S1 only.)

Wake-On-Ring

The Wake-On-Ring header is desig- nated JWOR. This function allows your computer to receive and "wake- up" by an incoming call to the modem when in suspend state. See the table on the right for pin defi nitions. You must have a Wake-On-Ring card and cable to use this feature.

PWR I2C

The PWR I2C header may be used to monitor the status of the power supply, fans and system temperature. See the table on the right for pin defi nitions.

IPMB

The IPMB header is for the System Management Bus. Connect the ap- propriate cable here to utilize SMB on the system. See the table on the right for pin defi nitions.

Wake-On-LAN

Pin Definitions

(JWOL)

Pin# Defi nition

1+5V Standby

2Ground

3 Wake-up

Wake-On-Ring

Pin Definitions

(JWOR)

Pin# Defi nition

1Ground (Black)

2Wake-up

I2C Header

Pin Definitions

(PWR I2C)

Pin# Defi nition

1Clock

2Data

3PWR Fail

4Gnd

5 +3.3V

SMBus Header

Pin Definitions (IPMB)

Pin# Defi nition

1Data

2Ground

3Clock

4No Connection

5-18