SUPER MICRO Computer AS1021M-T2, AS1021M-82 Accessing the Drive Bays, Removing the Front Bezel

Models: AS1021M-82 AS1021M-T2

1 104
Download 104 pages 55.86 Kb
Page 67
Image 67

Chapter 6: Advanced Chassis Setup

Figure 6-3. Removing the Front Bezel

1. Unlock

2. Press release knob

3. Remove bezel assembly

Accessing the Drive Bays

SATA/SCSI Drives: Because of their hotswap capability, you do not need to access the inside of the chassis or power down the system to install or replace SATA or SCSI drives. Proceed to the next section for instructions.

DVD-ROM/Floppy Disk Drives: For installing/removing a DVD-ROM or fl oppy disk drive, you will need to gain access to the inside of the AS1021M-T2/1021M-82 by removing the top cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive Installation" section later in this chapter for instructions.

Note: Only "slim" DVD-ROM and fl oppy drives will fi t into the AS1021M-T2/1021M-

82.

6-5

Page 67
Image 67
SUPER MICRO Computer AS1021M-T2, AS1021M-82 user manual Accessing the Drive Bays, Removing the Front Bezel