SUPER MICRO Computer I2DMR-8G2 user manual Installing and securing the Power Pod onto the Itanium

SUPER i2DMR-8G2/i2DMR-iG2 User's Manual

E. Installing and securing the Power Pod onto the Itanium 2

CPU

(*Notes: 1.The CPU Power Pod is a VRM mechanism specially designed for the Itanium 2 processors.)

1.Locate the opening slot on the CPU Power Pod, and align the opening slot with the Itanium2 CPU installed on the motherboard.

2.Carefully push the Edge Connector of the Power Pod toward the CPU until the Signal Pins on both edges of the CPU are fully seated in the Edge Connector and you hear a click. (*Warning: Unless the Signal

Pins of the CPU are fully seated in the Edge Connector of the Power Pod, the CPU will not function correctly!!)

1.) Align the opening slot of the CPU Power Pod with the CPU.

2.) Push the Edge Connector toward the CPU until you hear a click and the Signal Pins are fully seated in the Edge Connector.

Opening slot of the CPU Power Pod Power Pod

Itanium2 CPU

*Edge Connector

*Signal Pins

2-6