SUPER MICRO Computer I2DMR-8G2 Connecting AC Power to the motherboard and the Power Pods

Chapter 2: Installation

3.Secure the heatsink onto the CPU by tightening all four screws as shown in Figure 3.

4.Repeat the above steps 1-3 to install the second heatsink on the second CPU if needed as shown in the Figure 4.

Figure 4

The i2DMR-8G2/iG2 with two heatsinks installed

G. Connecting AC Power to the motherboard and the Power Pods

1.Connect the 24-pin power connector from the AC Power Supply to the motherboard. (Refer to Page 1-4 for the locations of power connectors.)

2.Connect two(2) 4-pin 12V/15A power connectors from the AC Power Supply to the power pods.

2-9