SUPER MICRO Computer I2DMR-8G2 user manual Itanium2 Processor and Heatsink Installation

SUPER i2DMR-8G2/i2DMR-iG2 User's Manual

2-2 Itanium2 Processor and Heatsink Installation

When handling the processor package, avoid placing direct pressure on the label area of the fan. Also, do not place the

! motherboard on a conductive surface, which can damage the

BIOS battery and prevent the system from booting up.

IMPORTANT: Always connect the power cord last and always remove it before adding, removing or changing any hardware components. Make sure that you install the processor into the CPU socket before you install the CPU heat sink.

Note: To optimize the functionality and capability of the i2DMR-8G2/ i2DMR-iG2, we recommend that i2DMR-8G2/i2DMR-iG2 be installed in Supermicro chassis only.

Warning: The heatsink on the MRH-D chip has been pre-installed by the

manufacturer. Please do not touch it. Turning the heatsink in a wrong way will damage it and will void the manufacturer's warranty.

A. Locating the components included in the shipping package

Locate the following components, which are included in the shipping package.

Two (2) Power Pod (VRM-0008)

Two (2 )Itanium 2 Heatsinks (SNK-0046)(*not included; sold separately) One Package of Retention Mechanism, including:

One (1) Retention Mechanism (SKT-0147-RM-IT2)

Eight (8) M3 5mm Screws

Three (3) 6-32 4.5mm Screws

Six (6) 6-32 8mm Screws

One (1) M2.5 Hex Key (*for CPU removal and locking)

2-2