SUPER i2DMR-8G2/i2DMR-iG2 User's Manual
C. Installing Motherboard into chassis
*Note: To optimize the functionality and the capability of the i2DMR-8G2/i2DMR-iG2, we strongly recommend that the i2DMR-8G2/i2DMR-iG2 be installed in Supermicro's proprietary chassis only-theSC813HS-500W (*for 1 U), SC823HS-500W (*for 2U).
1.Locate six(6) 6-32 8mm screws in the retention mechanism shipping package.
2.On the retention mechanism located on the motherboard, locate the six
mounting holes (as shown in the picture below), and locate their six corresponding mounting holes in the chassis.
3.Align the six mounting holes on the motherboard against the corre- sponding mounting holes in the chassis.
4.Screw six (6) 6-32 8mm screws into the mounting holes on the retention mechanism and the mounting holes in the chassis as shown in the pictures below.
5.Locate six 6-32 4.5mm screws included in the chassis mounting kit. Secure the motherboard onto the chassis by screwing 6-32 4.5mm screws into all the remaining mounting holes on the motherboard and the mounting holes in the chassis.
1.) Screw six 6-32 8mm screws into mounting holes on the board and on the
chassis.
2.) Secure the motherboard onto the chassis by screwing 6-32 4.5mm screws into all the remaining mounting holes on the board and on the chassis.
