SUPER MICRO Computer I2DMR-8G2 user manual Installation

Chapter 2: Installation

B. Installing the Heatsink Retention Mechanism on the Motherboard

1.Place the retention mechanism (P/N SKT-0147-RM-IT2) on the mother- board as shown in the picture below:

2.Secure the retention mechanism onto the motherboard by screwing three (3) 6-32 4.5MM screws into the mounting holes on the back of the motherboard.

1.) Place the retention mechanism on the motherboard

2.) Screw in three 6-32 4.5mm screws on the reverse side of the motherboard

2-3