NOTE: When the stopwatch is on, you cannot view or erase the logs.
3.4.4. HR limits
With this function you can set limits for your target heart rate zone and receive an alarm to notify when your heart rate is above or below the set limits. You can toggle between HR limits on and off, by long pressing ENTER in the main modes. If HR
limits are active, number 
is displayed on the right hand side of the Training mode display. Refer to chapter 4 for more information on alarms and limits.
• Low limit signal: - - - - - -
• High limit signal:
To set the limits:
1.In the Training menu, scroll to Hr Limits and press
ENTER.
2.Press UP/DOWN to select On and press ENTER.
3.Set the desired high limit with UP/DOWN and press
ENTER.
4.Set the desired low limit with UP/DOWN and press
ENTER.
NOTE: The maximum heart rate limit is 240 and the mini- mum heart rate limit is 30. The maximum limit cannot be lower than the minimum and vice versa. If the maximum rate is scrolled above 240, it continues from the minimum rate upwards.
NOTE: In the log, the training session is divided into different zones according to your HR limits regardless whether the limit alarm is on or off.
42
