NOTE: Battery covers of the transmitter belt and the wristop computer are not inter- changeable.
1.9. HEART RATE TRANSMITTER BELT
1.9.1.Activating the heart rate transmitter belt To activate the transmitter belt:
1. Attach the transmitter to the elastic strap.
2. Adjust the strap length to fit snugly and comfortably. Secure the strap around your chest, below the chest muscles. Lock the buckle.
3. Raise the transmitter a little off your chest and moisten the grooved electrode area on the backside. The electrodes must be wet during the exercise.
4. Check that the wet electrode areas are firmly against your skin and the logo is in a central upright position.
5. Wear the Suunto t6 like you would wear an ordinary watch.
6. In the Training mode, long press ALT/BACK to connect your Suunto t6 to the heart rate transmitter belt. Wait for acknowledgement that the transmitter belt has been found.
7. Activate the stopwatch in the Training mode.
NOTE: We recommend you to wear the transmitter against your bare skin to ensure flawless operation.
14
