TANDBERG D13639 manual Xstat call 1 channels 1 audio

TANDBERG MPS API

User Guide

xpreferences detaillevel <1..2>

Most information elements accessible by the status-type root commands are defined to be level1 information. However there are some information elements which are defined to be level2 information. When reading status information, only the information elements with a detail level equal to or less than the detaillevel defined for the interface will be listed.

Example 2.24

xstat call 1 channels 1 audio

*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing):

Channels 1 (type=Incoming):

Audio (status=Active): Protocol: G722 Rate: 64

*s/end

OK

xpreferences detaillevel 2

OK

xstat call 1 channels 1 audio

*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing, logTag=3):

Channels 1 (type=Incoming):

Audio (status=Active): Protocol: G722 Rate: 64 RemoteIPAddress: "" LocalIPAddress: "10.47.8.28:2326" Encryption (status=On):

Type: AES-128 RSVP: Off

RSVPRate: 0 DynamicRate: 64 TotalPackets: 1618

PacketLoss: 0

Jitter: 0

*s/end

OK

xpreferences xmlconfigfeedback <on/off>

If xmlconfigfeedback is set to on, feedback on configurations will be returned in XML-format instead of the standard XACLI configuration format.

Example 2.25

XACLI-format:

*c xConfiguration SerialPort 1 BaudRate: 2400

XML-format: <Configuration>

<SerialPort item="1">

34