TANDBERG MPS API
User Guide
4.1 command.xml – xcommand
Boot
CallFURBlock
CallMoveToQCIF
CallMute
Command used to reboot the system.
Parameters:
None
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand boot
*r Result (status=OK): *r/end
OK
Command used to block Fast updates to a call
Parameters:
•Call(r): <1..176>
•Value(r): <On/Off>
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Command used to move a call to QCIF
Parameters:
•Call(r): <1..108>
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Command used to mute incoming audio from a specific call.
Parameters:
•Call(r): <1..128> Reference to the call to be muted or unmuted.
•Mode(r): <On/Off> Denotes whether the call is to be muted or unmuted.
OK Result parameters:
None
ERROR Result parameters:
48
