ConferenceStart
TANDBERG MPS API
User Guide
•AudioG728: <On/Off>
•CascadingPreference: <Auto/Master/Slave>
•BillingCode: <S: 0, 16>
•CPAutoSwitch: <0..60>
•NetworkId: <1..32>
•ConferenceSelfview: <On/Off>
•Protect: <On/Off>
•TemplateReference: <1..10>
•HDEnabled: <On/Off>
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand conferenceredifine conference:1 duovideo:on restrict:on
*r Result (status=OK): *r/end
OK
Command used to start a new conference.
Parameters:
•Conference(r): <1..35>
•Name: <S: 0, 30>
•CallRate:
<1xh221/2xh221/64/128/192/256/320/384/H0/512/768/1152/1472/15
36/1920/Tlph>
•Restrict: <On/Off>
•Password: <S: 0, 8>
•PasswordOnOutgoingCalls: <On/Off>
•Encryption: <On/Off>
•EncryptionType:
•SecondaryRate: <On/Off>
•WelcomeMessage: <On/Off>
•DuoVideo: <On/Off>
•AudioG728: <On/Off>
•CascadingPreference: <Auto/Master/Slave>
•BillingCode: <S: 0, 16>
•CPAutoSwitch: <0..60>
•NetworkId: <1..32>
•ConferenceSelfview: <On/Off>
•Protect: <On/Off>
•TemplateReference: <1..10>
•HDEnabled: <On/Off>onference(r): <1..12>
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
52
