FeedbackDeregister
FeedbackRegister
TANDBERG MPS API
User Guide
accepted by the system
•Description Textual description of the cause code.
Example:
xcommand disconnectgwcall gatewaycall:1
*r Result (status=OK): *r/end
OK
Command used to deregister XML feedback over HTTP(S).
Parameters:
•ID: <1..3> ID for the registration to deregister.
OK Result parameters:
•ID: <1..3>
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand feedbackderegister id:1
*r Result (status=OK): ID: 2
*r/end
OK
Command used to instruct the system to return XML feedback over HTTP(S) to specific URLs. The parts of the Status and Configuration XML documents to monitor are specified by XPath expressions.
The system supports issuing feedback to 3 different URLs.
The system allows a total of 20 XPath expressions to be registered, with a maximum of 15 for a single URL.
Parameters:
•ID: <1..3> ID for the registration. If this parameter is omitted the system uses the first vacant ID.
•URL(r): <S: 0, 256> The URL to post feedback to.
•Expression.1..15: <S: 0, 256> XPath expression
OK Result parameters:
•ID: <1..3>
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand feedbackregister url:http://10.47.14.185:8000 expression.1:status/call expression.2:status/conferenc
e
*r Result (status=OK): ID: 2
57
