DialLocalEntry

DisconnectCall

DisconnectGWCall

TANDBERG MPS API

User Guide

Cause: <1…> Cause code specifying why the call was not accepted by the system

Description Textual description of the cause code.

Command used to dial a number from the locally stored directory.

Parameters:

Conference(r): <1..35>

LocalEntryId(r): <1..99> Reference to the directory entry to be dialed.

OK Result parameters:

CallRef: <1..96> Reference to the call. To be used as reference when monitoring the call.

LogTag: <1…> Unique reference to call. Identifies the call in the call log.

ERROR Result parameters:

Cause: <1…> Cause code specifying why the call was not accepted by the system

Description Textual description of the cause code.

Example:

xcommand diallocalentry localentryid:15

*r Result (status=OK): CallRef: 1 LogTag: 312

*r/end

OK

Command used to disconnect a call.

Parameters:

Call(r): <1..176> Reference to the call to be disconnected.

OK Result parameters:

None

ERROR Result parameters:

Cause: <1…> Cause code specifying why the command was not accepted by the system

Description Textual description of the cause code.

Example:

xcommand disconnectcall call:9

*r Result (status=OK): *r/end

OK

Command used to disconnect a gateway call.

Parameters:

GatewayCall(r): <1..80> Reference to the call to be disconnected.

OK Result parameters:

None

ERROR Result parameters:

Cause: <1…> Cause code specifying why the command was not

56

Page 58
Image 58
TANDBERG D13639 manual DialLocalEntry DisconnectCall DisconnectGWCall