FloorToSite
FloorToSiteEnd
GroupEntryAdd
TANDBERG MPS API
User Guide
*r/end
OK
Command used to assign floor to a specific site in a conference.
Parameters:
•Conference(r): <1..35>
•MCUID(r): <1..191> MCUID to the MultiSite the site is connected to.
•TerminalID(r): <1..191> The site’s terminal id, referenced to the MultiSite it is connected to.
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand floortosite conference:4 mcuid:85 terminalid:2
*r Result (status=OK): *r/end
OK
Command used to end the assignment of floor to a specific site in a conference supporting. Requires that the command FloorToSite has been issued in advance.
Parameters:
•Conference(r): <1..35>
OK Result parameters:
None
ERROR Result parameters:
•Cause: <1…> Cause code specifying why the command was not accepted by the system
•Description Textual description of the cause code.
Example:
xcommand floortositeend
*r Result (status=OK): *r/end
OK
Command used to add a new Group entry to the locally stored Group Directory (or MultiSite Directory). The entry is stored in the first vacant position in the Group Directory.
Parameters:
•Name: <S: 0, 48> The entry’s name.
•LocalEntryId.1..32: <1..99>References to local entry ids to be included in this Group entry.
OK Result parameters:
58
