TANDBERG MPS API
User Guide
Example 10
From the XML structure below we see that the BaudRate element of SerialPort[1] is configured to 9600. The BaudRate element references the SerialPortBaudrate element in the ValueSpace document, showing the value domain for this configuration.
<Configuration>> <SerialPort item="1">
<BaudRate item="1" valueSpaceRef="/ValueSpace/SerialPortBaudrate[@item='1']">9600</BaudR ate>
.
.
</SerialPort>
.
.
</Configuration>
<ValueSpace>
<SerialPortBaudrate item="1" type="Literal"> <Value>1200</Value> <Value>2400</Value> <Value>4800</Value> <Value>9600</Value> <Value>19200</Value> <Value>38400</Value> <Value>57600</Value> <Value>115200</Value>
</SerialPortBaudrate>
</ValueSpace>
To change configurations, the part(s) of the document containing the configurations to be updated should be posted back to the system with the new values. This will be described thoroughly in a later section.
1.4.4 Command documents (w)
Command documents contain descriptions of the supported commands for the system. A Command consists of a Command name and a set of Command parameters. The parameter elements have attributes to denote whether the parameter is optional or required, in a addition to referencing the value domain for the given parameter.
Command parameters do not contain any values when read from the system.
Example 11
The command Dial is defined to take five parameters, while only the Number parameter is required as specified by the attribute required. The value domain for the parameters is referenced by the attribute valueSpaceRef.
<Command>
<Dial item="1">
<Number item="1" required="True" valueSpaceRef="/ValueSpace/RemoteNumber"/>
<SubAddress item="1" required="False" valueSpaceRef="/ValueSpace/SubAddress"/>
11
