Tefal HT617138 manual Using the appliance, Mixer function with beaters or kneaders

Using the appliance

Important:

NEVER USE THE BEATERS OR KNEADERS AT THE SAME TIME AS THE BLENDER SHAFT, MINI-CHOPPER OR BLENDER BOWL.

Do not use the mini chopper or the blender bowl accessories without the stabilising base.

Mixer function with beaters or kneaders:

•Manual use (without the base):

•Check that the appliance is unplugged, that the speed control (a2) is set to “0” and that there is neither blender shaft, nor mini- chopper nor blender connected to the back of the appliance.

•Insert the rods of each beater (b) or kneader (d) into the corresponding holes and lock into place. The beaters and kneaders have a specific shape. The kneader or beater equipped with the metal collar (f) should be positioned to the left into the biggest hole (Fig.

1).

•Connect the appliance:

-Your appliance has 5 speed levels and a turbo button. Always begin mixing or kneading at speed 1 initially, then move to speed 2, 3, 4 or 5 (Fig. 2).

-To knead thick dough, we recommend using speed 5 only.

-You can also increase the speed by pressing the turbo button. We

however recommend that you use it only briefly (a maximum of 30 seconds for thick dough).

•After finishing, set the speed control (a2) to “0”.

•Disconnect.

•Then press the ejection button (a1) to remove the beaters or kneaders.

•Using with the base (g): (depending on model)

•Check that the appliance is unplugged, that the speed control (a2) is set to “0” and that there is no blender shaft.

•Insert the rods of each beater (c) or kneader (e) into the corresponding holes and lock into place. The beaters and kneaders have a specific shape. The kneader or beater with the metal collar (f) should be positioned to the left, in the biggest hole (Fig. 1).

•Place the base (g) on the worktop:

-To raise the arm, unlock by pressing the button (i) (Fig. 3).

-Position the bowl (h) (Fig. 3).

-Press the button (i) to unlock the arm and lower it (Fig. 4).

-Place the mixer fitted with the kneaders or beaters on the hinged arm until you hear it click into place

(Fig. 5).

Note:

INSERT THE MIXER BY POSITIONING

THE BEATERS OR KNEADERS IN THE

NOTCHES (Fig. 5).

85