%#(),-% +).&",$))-%(#
 "+/% " (.& 6Ć87
The SelfĆTestdiagnostics and Extended Diagnostics are accessible using the
two commands listed in Table6Ć6.
&"2431,-"')!" )''(!,
"!"+ +#.'"(- )-",
 SetĆonly
  SetĆonly
  SetĆonly
 QueryĆonly
The  command invokes SelfĆTestdiagnostics or Extended Diagnostic
execution. The  command without arguments initiates SelfĆTestdiagĆ
nostics. The  command with argument  initiates Extended DiagĆ
nostics.
Refer to the CSA 803C and 11801B Programmer Manual for more informaĆ
tion on TEST and DIAG command syntax and usage.
The return of one of two event codes listed in Table6Ć7 to the GPIB and
RSĆ232ĆC ports signals that diagnostic testing is complete.
&"243/"(-)!" ", +%*-%)(,
/"(- )!" 0*&(-%)(
460 SelfĆTestor Extended Diagnostics were completed sucĆ
cessfully
394 SelfĆTestor Extended Diagnostics were completed and
failed
In either case, a GPIB/RSĆ232ĆC controller may obtain pass/fail information
through the  query.
The  command with argument  initiatesthe Extended Diagnostics
similarly to entering Extended Diagnostics through the front panel UTILITY
menu. The primary use of this command is to provide the remote operator a
convenient way of accessing the diagnostics through the normal RSĆ232ĆC
interface so that the operator can use the Diagnostic TerminalMode to do
remotetesting.
CAUTION
The TEST command with argument MAN violates normal GPIB
protocols in that, when used, the instrument becomes nonĆresponĆ
sive to further GPIB commands until normal operation is resumed.
1,-"' )!"  44