
%"% ! &'&
%"% ! %'"!
4Ć26
+'# +Identifythe trace as follows:
%icon touch.............................................
Identify Channel () touch...................................
Select !'% & touch....................................
+'# +Set the mainframe VertOffset as follows:
Vertsize icon touch............................................
Set %'* to 2 mV/div adjust upper knob................
+'# + Set Averaging as follows:
$(% & (in major menu) touch.............................
)% (in popĆup menu) touch..............................
+'# +Select the Mean Measurement as follows:
MEASUREbutton press........................................
&(% !'& (in major menu) touch........................
! (in the &(% !'&popĆup menu) touch.............
" #% %!& (in major menu) touch...................
) (%%!' & (&& %!& (in popĆup menu) touch.
" #% " (to "! in popĆup menu) touch.......................
+'# +Set the Voltagesource to 8 mV.
Select ")% %(in major menu) touch...................
Select % %(in popĆup menu) touch.......................
+'# +Waitfor averaging to complete. Then, check that the DMean
value is to be within 7.8 mV (lower spec) and 8.2 mV (upper spec).
NOTE
Averaging will complete faster if you exit the measurement menu
and then return when averaging is complete. Alternatively,use the
dial to move the Main Size setting two notches higher than the
default setting.
+'# +Change the polarity of the voltage differential coming from the
precision voltage Source. Check that the DMean value is between
-7.8 mV and -8.2 mV.