SpecificationsMTG100 & MTG300 MPEG Generator Service Manual 1Ć9
Table1Ć3: Electrical characteristics (Cont.)
Characteristics Description
SSI output Complies with SMPTE 310M.
Connector type BNC
Impedance 75
Data rate 1 Mbps to 40 Mbps (Not managed when the data frequency is more than 40 Mbps.)
Output voltage 800 mV ±10 %
Return loss 30 dB , 100 kHz to 80 MHz
Drift and wander 0.028ppm/s, 1 kHz
Jitter 2 ns, 1 kHz to 800 kHz
Rise/fall time (20 % to 80%) 0.4 ns to 5.0 ns
1.6 ns (difference between rise and fall time)
Condition This output cannot be used with the external clock input.
Display
Display area Width: 13.2 cm (5.2 inches)
Height: 9.9cm (3.9 inches)
Resolution Horizontal: 640 pixels
Vertical: 480 pixels
AC line power
Rating Voltage 100 to 240 VAC
VoltageRange 90 to 250 VAC
Frequency Range 48 to 63 Hz
Maximum power 200W
Maximum current 2A
InstallationCategory CATII
Table1Ć4: Mechanical characteristics
Characteristics Description
Net weight
Standard Approximately14 kg
Dimensions
Height 132 mm (without front feet extended)
Width 430 mm
Length 560 mm