Removal and Installation Procedures
MTG100 & MTG300 MPEG Generator Service Manual
d. Grasp the right and left edges of the cabinet toward the back. Push
against the chassis rear panel, toward the front of the MPEG generator,
to separate it from the cabinet.
e. Slide the cabinet off the MPEG generator. Take care not to bind or snag
the cabinet on internal cabling as you remove it.
5. Reinstall cabinet:
a. Perform step 4 in reverse order to reinstall the cabinet. Take care not to
bind or snag the cabinet on internal cabling; redress cables as necessary.
b. Plug the line cord into its receptacle on the rear panel. This completes
the MPEG generator reassembly.