Tektronix MTG100, MTG300 Front Panel Assembly

Removal and Installation Procedures
6Ć22 MTG100 & MTG300 MPEG Generator Service Manual
  
 
Figure 6Ć8: FrontĆpanel unit removal
1. Assemble equipment and locate modules to be removed:
a. You need a 1/16 inch hex wrench (Item 19) and a screwdriver with a size
#2 Phillips tips (Items 1 and 3).
b. Locate the module to be removed in the locator diagram External
modules, Figure 6-2, page 6-13.
2. Remove the A30 Front Panel board: See Figure 6-9.
a. Using a screwdriver with a size #2 Phillips tip, remove the six screws
securing the A30 board to the front panel cover.
b. Unplug the cable from the rotary encoder at J300.
c. Unplug the cable from the power switch at J310.
d. Lift the board away.
Front Panel Assembly