Removal and Installation Procedures
MTG100 & MTG300 MPEG Generator Service Manual 6Ć11
Equipment Required. Most modules in this MPEG generator can be removed with
a screwdriver handle mounted with a size #2, Phillips tip. Use this tool whenever
a procedure step instructs you to remove or install a screw unless a different size
screwdriver is specified in that step. All equipment required to remove and
reinstall each module is listed in the first step of its procedure.
Table6Ć5: Tools required for module removal
Item
No. Name Description
Tektronixpart
number
1 Screwdriver handle Accepts PhillipsĆdriver bits
2 #1 Phillips tip PhillipsĆdriver bit for #1 size
screw heads
3 #2 Phillips tip PhillipsĆdriver bit for #2 size
screw heads
4 FlatĆbladed screwdriver Screwdriverfor removing
standardĆheadedscrews
5 Hex wrench, 0.05 inch Standard tool
6 Hex wrench, 1/16 inch Standard tool
7 OpenĆend wrench, 1/2inch Standard tool
8 OpenĆend wrench, 5/16 inch Standard tool
9 Nut driver, 1/2inch Standard tool
10 Nut driver, 1/4inch Standard tool
11 Nut driver,5/16 inch Standard tool
12 Nut driver, 5 mm Standard tool
13 AngleĆtip tweezers Standard tool
14 NeedleĆnose pliers Standardtool