Teledyne Advanced Pollution Instrumentation | Model 633 Aethalometer® Black Carbon Monitor User Manual |
Example 2: If you are using Hyper Terminal just write following command $AE33:D1 and press enter (this should add CR character at end of command).
Example 3: $AE33:T20120110120000[CR] will synchronize the time on the Aethalometer to 10 Jan 2012, noon.
Note: Hyper Terminal may experience problems when sending the string more than two consecutive identical numbers (111, for example).
4.6 External Devices
Several external devices are supported for data‐logging using the Aethalometer. Before use the connection with the selected device should be enabled using “External device” button on the Operation/Advanced tab. Select the device connected to the certain COM port and click “Connect”. Aethalometer will try to connect to the device every few seconds. When connected the status will go green.
Supported devices:
‐AMES_TPR159 – dedicated ambient temperature + pressure + relative humidity sensor used for flow reporting at ambient conditions
‐Comet_T0310 – temperature sensor
‐Vaisala_GMP343 – CO2 sensor
‐TSI_4100 – mass flowmeter
‐Remote_Access – the selected port is waiting for communication with the data‐logger
07645A DCN6170 | 45 |
