Thermador SCD302 manual Solving Operational Problems, Problem Solving

S Oven Care and Use Manual Oven Maintenance

Solving Operational Problems

Before calling for service, check the following to avoid unnecessary service charges.

PROBLEM	PROBLEM SOLVING
OVEN	STEPS
All the numbers touched	The numbers were touched too rapidly. Be sure you remove your finger from
do not appear in display	the number pad between digits. Example: 4, 0, 0.
F-1 to F-9, FC, FF, F- or Fr	Touch OFF or turn power off at the circuit breaker, wait 3 minutes and turn
flash in the display	it back on. If condition persists, note the code number and call an authorized
	servicer.
F-7	This is caused by close contact to the control panel for more that 32 seconds,
	such as someone leaning against the controls or objects hanging in front of
	controls. Follow previous solution.
Clock and timer	Make sure there is proper electrical power to the oven.
do not work	See the CLOCK and TIMER sections on Pages 7 & 8.
Cooling fan continues to	The fan turns off automatically when the electronic components have cooled
run after oven is turned off.	sufficiently.
Oven will not work	Make sure there is proper electrical power to the oven.
	Check the circuit breaker or fuse box to your house.
Oven light does	Replace or reinsert the light bulb if loose or defective. See Page 30.
not work	Touching the bulb with your fingers may cause the bulb to burn out quickly.
	Oven light does not work if CLEAN mode is set.
Oven temperature is	The oven thermostat needs adjustment. See the OVEN TEMPERATURE
too hot or too cold	CALIBRATION in Do-It-Yourself Maintenance, Page 33.
Oven will not self-clean	The oven temperature is too high to set the self-clean operation.
	Allow the oven to cool to room temperature and reset the controls.
	Be sure you have touched CLEAN.
The oven door will not	Allow the oven to cool below the locking temperature.
unlock
Oven is not clean	Heavily soiled ovens may need to self-clean again or for a longer
after the clean cycle	period of time. Heavy spillovers with soft or liquid centers should be wiped up
	before starting the clean cycle. See Self-Cleaning the Oven, Pages 26 and 27.

HOW TO OBTAIN SERVICE

For authorized service or parts information, call 800/ 735-4328.

We want you to remain a satisfied customer. If a problem does come up that cannot be resolved to your satisfaction write to Thermador Customer Support Call Center, 5551 McFadden Avenue, Huntington Beach CA, 92649 or call: 800/ 735-4328.

Please include the Model Number, Serial Number and Date of Original Purchase/Installation.

Page 35