Thermador SCD302 Description of Touch Pad Functions, Oven, Light, Pads, and temperature, Bake

S Oven Care and Use Manual Oven Touch Pad

Description of Touch Pad Functions

The control panel contains a series of electronic touch pads that enable you to set the oven. As you touch these control pads, you will notice that numbers and words appear in the display window. These numbers and words are called prompts and show you what is set and what must be done next.

Take a moment to familiarize yourself with these controls. To set the oven, touch only one control pad at a time.

1	2	3	4		8	9	10	11
									12
	COOK		STOP	1	2	3	BAKE	OFF
	TIME		TIME
	TIMER 1		TIMER 2	4	5	6	BROIL	SELF	13
								CLEAN
	CLOCK		OVEN	7	8	9	CONVECTION	CONVECTION
			LIGHT					ROAST	14
					0
	5	6		7

Oven Control Panel showing all of functions.

1Window Display

2Cook Time

3Timer 1

4Clock

5Stop Time

6Timer 2

Clock display and cooking modes.

Touch to set cooking time in minutes or hours for Bake, Convection or Convection Roast modes.When this pad is used instead of Timer 1 or 2, the oven will turn off automatically after the Cook Time has ended.

Touch to set as an audio reminder kitchen timer. Press again and hold to cancel the minute timer.

Touch to set the time of day on the 12-hour clock.

Touch after setting CookTime or Self Clean to set the time of day the oven will automatically turn off.

Touch to set as a second audio reminder. Press again and hold to cancel the minute timer.

7 Oven	Touch to turn on oven light.
Light	Touch again to turn off oven
	light.

8Number Touch each number to set time

	Pads	and temperature.
9	Bake	Touch to select the Bake Mode.
10	Broil	Touch to select the Broil Mode
11	Convection	Touch to select the Convection
		Mode
12	Off	Touch to cancel any mode
		except Timer 1 and 2.
13	Self Clean	Touch to select the Self-Clean
		Mode.
14	Convection	Touch to select the Convection
	Roast	Roast Mode.

If an "F-and a number" flash in the display, this indicates a function error code. Touch the oven OFF pad or turn off power at the circuit breaker. Wait for 3 minutes and turn it back on. Try again to program your oven function. If function error code repeats, note the code number, disconnect power to the oven and call for service.

Page 5