Tiger Products Co., Ltd 5083E manual Drive Shaft Yoke, U-Jointstub Shaft, Greasing The Boom Swivel

MAINTENANCE

DRIVE SHAFT YOKE, U-JOINT STUB SHAFT

WIth engine stopped, inject Lithium-Complex extreme pressure grease confirming to NLGI2-ISO 320 specifications into universal joints and slip yoke until grease appears at the seal. Grease them daily or every 8 hours.

MAINTENANCE

GREASING THE BOOM SWIVEL

Locate the zerks on the main swivel boss (if applicable), main boom pivot boss (if applicable) and on both ends of the boom swivel cylinder. Inject Lithium-Complex Extreme Pressure grease conforming to NLGI2-ISO 320 specification until grease begins to protrude from ends.

Boom Maintenance Section 4-16

©2011 Alamo Group Inc.