ASSEMBLY

FINAL PREPARATION FOR OPERATION

Place operators safety and operation decals on the steering column and side counsel where they are clearly visible to the operator. These decals should be understood by each operator of the machine in conjunction with the safety and operation section of this book. The decals are to be maintaned in good condition as a reminder to the operator, and should be replaced if damaged.

Finally, all bosses, pins and pivot points will need to be greased as instructed in the maintenance section of this manual. The hydraulic reservoir can also be filled with the recommended fluid (see maintenance section) and the filter installed in the top of the tank. Double check all fittings and fasteners BEFORE starting tractor. Also secure any loose hoses together with zip ties and wrap with split hoses where friction may occur on the hoses.

BEFORE starting or operating the tractor you must read and understand the safety and operation sections of this manual completely.

BE SURE THE BALL VALVES ARE OPEN! Start tractor and allow instruments to stabilize. Using a piece of paper or cardboard as noted in the safety and maintenance sections, check all fittings and connections for hydraulic leaks.

If a leak is found, you must shut down the tractor, set the cutter on the ground. Before attempting to fix the leak, you must actuate the lift valve handles several times to relieve any pressure in the lines.

Before operating the mower, the cutter head and boom should be slowly moved throughout the full range of motion. Watch for any condition that would cause pinching or excess stress on the hoses. The steering and front axle travel should also be carefully moved through their full range of motion. If any condition occurs in which the hoses contact the tires, the steering and / or front axle travel may need to be limited as described in the tractor operators manual. This should also be done if the tires rub, or are extremely close to any other part of the mower such as the hydraulic tank or draft beam. This may include adding shims, or adjusting stop bolts in the tractor front to solve the problem. While checking motion, you should also check that the control circuits are connected according to the operators decal for the valve handles.

MOWER TESTING

Take the tractor to a place free of loose objects on the ground. Operate the cylinders through their full range of motion again, to clear the lines of air. Follow the instructions in the operation section to operate the mower. Vibration of the mower should be minimal at all times. After a 5 minute test run, the knife bolts should be retorqued and once again after the first few hours of operation.

If any parts of this assembly section, or any other section of this manual are not clearly understood you must contact your dealer or the address on the front of this manual for assistance!(ASM-C-0010)

Assembly Section 2-20

Page 51 Page 53
Page 52
Image 52
Tiger Products Co., Ltd 5093E, 5083E, 5101E manual Assembly Final Preparation for Operation, Mower Testing
Page 51 Page 53

5101E, 5093E, 5083E specifications

Tiger Products Co., Ltd is known for its innovative solutions in the field of construction and engineering, particularly with its range of heavy machinery and tools. Among its noteworthy offerings are the models 5093E, 5083E, and 5101E, each designed to meet the demanding needs of professionals in various sectors, including civil engineering, infrastructure development, and heavy-duty construction tasks.

The Tiger 5093E is engineered for reliable performance with a focus on versatility. Its most notable feature includes a robust hydraulic system that enhances lifting and digging capabilities, making it an essential tool for excavation and material handling. The 5093E is equipped with advanced safety features, such as an automatic shut-off system, which prevents operational overload and guarantees user safety during extensive tasks. Additionally, its compact design ensures maneuverability in tight spaces without compromising on power.

The Tiger 5083E brings a blend of strength and efficiency to the job site. One of its defining characteristics is its fuel-efficient engine that minimizes operational costs while maximizing productivity. The 5083E is ideal for landscaping and grading, as it offers precision in its movement with a high degree of control. It also boasts user-friendly controls and an ergonomic operator cabin designed for comfort during long hours of operation. This model is particularly suitable for urban construction projects, where space and efficiency are critical.

Lastly, the Tiger 5101E represents the pinnacle of technological advancement in the company's lineup. This model features state-of-the-art digital monitoring systems that provide real-time data on performance metrics, allowing operators to optimize usage and ensure longevity of the equipment. The 5101E is built for heavy-duty tasks, equipped with reinforced components capable of withstanding extreme conditions. Its exceptional load capacity and rapid cycle time make it a favorite for large-scale demolition and material transport projects.

In summary, Tiger Products Co., Ltd's models 5093E, 5083E, and 5101E are exemplars of modern engineering, combining power, efficiency, and safety. These machines cater to a wide array of applications, ensuring that they are indispensable assets for any construction professional looking to enhance productivity and achieve superior results in their projects.
Top Page Image Contents