Tiger Products Co., Ltd 5101E, 5083E Assembly Valve Plumbing With Mid-Mountvalve, Svcmid-Mount

(ASM-JD-0067

ASSEMBLY

VALVE PLUMBING (WITH MID-MOUNT VALVE)

The tractor ports used are on the selective control valve (SCV) and the Mid-Mount valve. The SCV is located between the right arm of the three point hitch and the axle. The Mid-Mount valve is located under the right front corner of the cab. The power beyond port is located on the bottom of the Mid-Mount valve towards the front. The excessive flow port is located on the underside of the SCV. The return port is accessed through the end of a run tee located on the SCV. See the lift valve page in the parts section for hardware and location of parts.Refer to the image below as a guide.

SVCMID-MOUNT

Use the existing adapter in the power beyond port of the mid-mount valve for the pressure hose. That hose is routed to the “P” port of the husco valve. The return hose from the lift valve is connected to the closest end on the run tee of the “T” port on the selective control valve. Plumb the power beyond hose from the “PB” port on the husco valve to the “EF” port on the SCV. Refer to the Parts Section for hardware used. The return line on the mid-mount valve must be replaced with a hose. This hose is routed from the existing adapter in the return port on the mid-mount valve to the run tee in the “T” port on the selective control valve.

Assembly Section 2-9