Tiger Products Co., Ltd 6020009 manual Detailed Maintenance

MAINTENANCE

RECOMMENDED FILLING INSTRUCTIONS

FOR HYDRAULIC RESERVIORS

When filling or checking the oil level, the unit should be parked on a level

surface, shut “OFF”, and allowed sufficient time to cool to ambient temperature.

Use caution when removing the pressurized breather. Do not place face over opening when removing the breather.

The reservior should be filled to the top of the lower sight glass on the side of the tank. Do not over-fill. The reservior has been over-filled when oil is visible in the upper sight glass. If tank has too much oil, the excess may be expelled through the pressurized breather.

DETAILED MAINTENANCE

REPLACEING IN-TANK HYDRAULIC FILTER:

Loosen the four bolts on the top cover of the filter housing. Turn cover counter-clockwise until cover is free. Remove and replace filter. Replace top cover and cover bolts in opposite order as removed.

Twin Rtry Maintenance Section 4-10