LAN

Using the switch

To select a network device, follow the steps below.

1.a. In Windows XP, click start, point to All Programs, click Network Device Switch.

b.In Windows 2000, click start, point to Programs, click Network Device Switch.

2.Left-click the Network Device Switch icon on the Task bar to display a device menu.

Figure 4-14 Sample of a network device menu (left click)

3.Click the network device you want to enable. A check will appear beside the enabled devices. Devices without checks are disabled.

Auto Switch menu

Right-click the Network Device Switch icon to display the Auto Switch menu.

ASICSB PERATINGO

Figure 4-15 Auto Switch menu (right click)

Auto Switch

When Auto Switch is selected, this application automatically enables the wireless LAN device when you disconnect the LAN cable. This feature works only if a wired LAN device is currently enabled and the LAN uses TCP/IP protocol.

4-17