Appendix C

;Return to command mode. Causes the modem to return to command mode after dialing a number, without disconnecting the call.

S=n Dial a telephone number previously stored using the &Zn=X command (See &Zn=X command for more information). The range is 0-3.

En Echo command

This command controls whether or not the characters entered from your computer keyboard are displayed on your monitor (echoed) while the modem is in command mode.

E0 Disables echo to the computer.

E1 Enables echo to the computer (default).

Result Codes:

OK n=0,1

ERROR Otherwise

Hn Hook control

This command instructs the modem to go on-hook to disconnect a call, or off-hook to make the phone line busy.

H0 Modem goes on-hook (default).

H1 Modem goes off-hook.

Result Codes:

OK n=0,1

ERROR Otherwise

In

Request ID information

This command displays product information about the modem.

I0 Returns modem identity string and driver version number.

I3 Same as I0.

I9 Returns region ID in English.

Result Codes:

OK n=0,3,9

ERROR Otherwise

C PPENDIXA

C-3