OPERATING BASICS
User's Manual
2.Plug one end of the cable into the LAN’s jack. Press gently until you hear the latch click into place.
Figure
3.Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
CAUTION: Make sure the LAN Active indicator (yellow LED) is out before you disconnect the computer from the LAN.
1.Pinch the lever on the connector in the computer’s LAN jack and pull out the connector.
2.Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.
Network Device Switch
This application is used to select one network device on your system and to prevent inconsistent routing table problems on TCP/IP networks.