Using the internal modem
Using the internal modem
This section describes how to make settings and connect the modem. Refer to the computer’s online help files for more information. Refer also to the online help files for your modem software.
NOTE: The internal modem does not support the voice functions described in the help files. All data and fax functions are supported.
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable from the telephone jack.
2.Do not connect the modem to a digital telephone line. A digital line will damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem’s settings are correct for the region in which it will be used.
1.a. In Windows XP, click start, point to All Programs, point to TOSHIBA Internal Modem and click Region Select Utility.
NOTE: Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/Region in the Control Panel, the change may not take effect.
b.In Windows 2000, click Start, point to Programs, point to TOSHIBA Internal Modem and click Region Select Utility.
2.The Region Selection icon will appear in the Windows Task Bar.
Figure
ASICSB PERATINGO