HW Setup

NOTES: 1. PC card HDD boot is supported only by slot 0 on the computer. Support is guaranteed only for TOSHIBA PC cardHDDs.

2.When you assign a PC card HDD top priority, “PC” is not displayed. However, the PC card HDD takes the position of HDD in the Boot Priority Options list above.

To change the boot drive, follow the steps below.

1.Hold down F12 and boot the computer.

2.The following menu will be displayed with the following icons: Built-in HDD, Select Bay HDD, CD-ROM, FDD, Network (LAN), PCA (ATA) card boot.

AND ETUPS HW ASSWORDSP

NOTE: A bar will appear only under the selected device.

3.Use the left/right cursor keys to highlight the boot device you want and press

Enter.

NOTES: 1. If a supervisor password is set, the menu above does not appear when you use the user password to start the computer.

2.In this computer, CD-ROM refers to the DVD-ROM or CD- RW/DVD-ROMdrives.

3.The selection method above does not change the boot priority settings in HW Setup.

4.If you press a key other than one of those above or if the selected device is not installed, the system will boot according to the current setting in HW Setup.

7-9