User’s Manual

3. Grasp the card and remove it.

OPTIONAL DEVICES

SD CARD INDICATOR

SD CARD

Figure 8-5 Removing an SD card

CAUTION: Make sure the SD card indicator is out before you remove the card or turn off the computer’s power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card.

Memory expansion

You can install additional memory in the computer’s memory module to increase the amount of RAM.

CAUTION: Only memory modules with the following parts numbers can be installed:

PA3126U-1M12: 128 MB

PA3127U-1M25: 256 MB

Installing memory module

To install a memory module, make sure the computer is in boot mode then:

1.Turn the computer off in boot mode. Refer to the Turning off the power section in Chapter 3.

CAUTIONS: 1. If you use the computer for a long time, the memory modules will become hot. In this case, let the memory modules cool to room temperature before you replace them.

8-6