External monitor
6.Turn on the printer.
7.Turn on the computer.
8.Start the Hardware Setup program. Refer to Chapter 7 HW Setup and Pass- words.
9.Select the Parallel/Printer tab from the TOSHIBA HW Setup window.
10.Set the Parallel Port Mode and press OK.
11.Choose Reboot for the change to take effect.
12.Select the printer in Windows Add Print Wizard. To access the Add Print Wizard utility, click Start, point to Settings, click Printers and double click the Add Printer icon.
External monitor
An external analog monitor can be connected to the external monitor port on the computer, Port Replicator. The computer supports VGA and Super VGA video modes. To connect a monitor, follow the steps below.
CAUTION: If an external monitor is connected to the computer, do not connect the Port Replicator. First disconnect the external monitor from the computer then connect the Port Replicator and use its external monitor port.
NOTE: The Resume feature can be used with an external monitor. Simply enable Resume and the computer will maintain the data as it is displayed on the external monitor.
1.Connect the monitor to the external monitor port.
2.Turn the monitor’s power on.
When you turn on the power, the computer automatically recognizes the monitor and determines whether it is color or monochrome.
You can use the HW Setup to select between
If you have selected Simultaneous under the Display options of the HW Setup, both the external monitor and the internal LCD will be active when you turn on the computer. If
EVICESD PTIONALO