Appendix F

Supported frequency sub-bands

Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 2.4 GHz channels (see Table F-5).

Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region.

Table F-5 Wireless IEEE 802.11 Channels Sets

Frequency Range

2400-2483.5 MHz

Channel ID

 

1

2412

2

2417

3

2422

4

2427

5

2432

6

2437

7

2442

8

2447

9

2452

10

2457*

11

2462

* Factory-set default channels

When installing Wireless LAN cards, the channel configuration is managed as follows:

◆For Wireless clients that operate in a Wireless LAN Infrastructure, the Wire- less LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.

◆For Wireless LAN cards installed in Wireless clients operating in a peer-to-peer mode, the card will use the default channel 10.

◆In a Wireless LAN Access Point, the Wireless LAN card will use the factory- set default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device.

F PPENDIXA

F-9