Toshiba B-450-QP SERIES owner manual Covers

11. GENERAL MAINTENANCE

ENGLISH VERSION EO1-33005

11.2 COVERS

6.Clean the platen with a cloth moistened with alcohol.

7.Remove any dust or glue from the detection area of the sensors and paper path with a soft cloth.

Platen

Black mark/Feed gap sensor

Fig. 11-2

8.Remove the supply holder rollers from the supply holder unit. Remove any dust from the recessed portions of the base and wipe glues from the rollers with a slightly moistened soft cloth.

Recessed portion of the base

Supply Holder Roller

Supply Holder Base

Fig. 11-3

11.2 COVERS

The covers should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild detergent solution.

NOTE: Clean printer cover with an electrostatic free cleaner for automated office equipment.

WARNING!

1.DO NOT POUR WATER directly onto the printer.

2.DO NOT APPLY cleaner or detergent directly onto any cover.

3.NEVER USE THINNER OR OTHER VOLATILE SOLVENT on the plastic covers.

4.DO NOT clean the covers with alcohol as it may cause them to discolour, loose their shape or develop structural weakness.

E11-2