Toshiba B-450-QP SERIES owner manual Paper LABEL/TAG Specifications, Ribbon Specificatins, Option

2. SPECIFICATIONS

ENGLISH VERSION EO1-33005

2.3 PAPER (LABEL/TAG) SPECIFICATIONS

2.3 PAPER (LABEL/TAG) SPECIFICATIONS

				[Unit: mm]
Label dispensing mode	Batch mode	Strip mode		Cut mode
Item
Span of one label/tag	15.0 ~ 999.0	25.4 ~ 999.0		Label: 37.0 ~ 999.0
				Tag: 25.4 ~999.0
Label length	13.0 ~ 997.0	23.4 ~ 997.0		31.0 ~ 993.0
Width including backing paper		25.4	~ 114.0
Label width	2.0 ~ 20.0	22.4	~ 111.0
Gap length		2.0 ~ 20.0		6.0 ~ 20.0
Black mark length (Tag paper)		2.0	~ 20.0
Effective print width		10.0	~ 105.7
Effective print length Label		15.0	~ 500.0
Tag		15.0	~ 500.0
Print speed up/slow down area			1.0
Black mark length (Label)		MIN. 2.0
Outer roll diameter	MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
Thickness	0.1 ~ 0.17	0.13 ~ 0.17		0.1 ~ 0.17

2.4 RIBBON SPECIFICATINS

Type	Spool type
Width	60 mm ~ 110 mm
Length	(300 m)
Outer diameter	Ø65 mm (max.)

NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and ribbons.

2.For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE PAPER AND RIBBON.

2.5OPTION

Option Name	Type	Description
Cutter module	B-7204-QM	A stop-and-cut rotary cutter
Strip module	B-7904-H-QM	This module strips the label from the backing paper with the
		take-up block and strip block.
Keyboard module	KB-80-QM	This module is an external intelligent keyboard unit.
Expansion I/O inter-	B-7704-IO-QM	Installing this board in the printer allows a connection with
face board		an external device with the exclusive interface, such as the
		keyboard module.
LAN interface board	B-7704-LAN-	This board enables the printer to be used in a LAN network
	QM	by using the command language.

NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC repre- sentative or TOSHIBA TEC Head Quarter.

E2-2