Toshiba B-450-QP SERIES owner manual E8-2

Paper wound outside.

8. LOADING THE PAPER

ENGLISH VERSION EO1-33005

8. LOADING THE PAPER

3. Put the paper roll and supply holders on the supply holder unit.

NOTE: Paper may be wound outside or inside. Regardless of the paper roll, the paper must be loaded so that the print side faces upward.

Paper wound inside.

Fig. 8-4

4. Push both sides of the supply holder guides against the paper roll, then lock them with the lock lever. NOTE: Make sure that the supply holders rotate slightly.

5.Pass the paper through the printer until it is past the paper outlet.

6.Adjust the position of the paper guides to the paper width, then lock them with the lock lever.

Paper Guide

Paper Roll

Supply Holder

Paper Guide Lock Lever

Supply Holder Guide
Lock Lever	Fig. 8-5

7. Close the print head block by pressing both sides of the print head block’s top until it clicks.

Head Block

Fig. 8-6

E8-2