Toshiba Flat Panel Television Connecting a DVD player or satellite receiver and a VCR

Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs, and record one channel while watching another channel.
You will need:
• two (or three, if satellite receiver is used) coaxial cables
• one set of standard A/V cables (between the TV and VCR)
(plus one additional set of standard A/V cables if satellite receiver
is used)
• one S-video cable (between the TV and DVD player/satellite
receiver)
• one pair of standard audio cables (between the TV and DVD
player/satellite receiver)
Note:
For the highestpossiblepicture qualityfrom a
DVD player/satellitereceiver without
component videoor DVI/HDCP, use an
S videocable between the TVand DVD
player/satellite receiver Clfyour DVD player/
satellite receiveris compatible with
component video,seepage 13 If your DVD
player/satellite receiveris compatible with
DVI/HDCP, seepage 16).
Do not connect the DVD player/satellite
receiverand VCRto the same videochannel
on the 7g CSeethe illustrations,which show
the DVD player/satellite receiverconnected to
VIDEO 1 on the TVand the VCRconnected
to VIDEO2 on the Tg5
From
Antenna
TV
Stereo VCR
Theunauthorizedrecording,use,distribution, I
orrevisionof televisionprograms,videotapes, ]
DVDs, andother materials is prohibitedunder ]
the CopyrightLawsof the UnitedStatesand ]
othercountries,and may subjectyonto civil ]
andcriminal liability.
From
Satellite
Dish
12