Connecting a DTV receiver/set-top box with ColorStream ® (component video} and a VCR

This connection allows you to watch DTV (digital TV broadcast), VCR, and TV programs, and record DTV and TV programs. You can

record from one source while watching a program from another source.

Your TV has ColorStream ® (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.

You will need:

three coaxial cables

two sets of standard A/V cables

one set of component video cables

one pair of standard audio cables

From

Antenna Stereo VCR

From

DTV Antenna

Note:

For the highest possiblepicture quality,use component video cables Cora DVl D digital single link cable] between the TVand DTV

receiveL

Youcan connect component video cables from the DTV receiver to either set of CelorStream terminals on the TV CHD I or HD 2].

The ColorStream HD l and HD_ terminals can be used with ProgressiveC480p,720p] and Interlaced C480_lO80i) seansystems.

#your DTV receiveris not compatible

wi_l component video CorDVI/HDCP], use an S video cable Cplusan audio connection] insteac_

Torecord from the DTV receiver,set the VCR to Line IN. Tomonitor recording from the DTV receiver,set the VCRto Line IN and the 7V to

VIDEO 1

Theunauthorizedrecording, use, distribution, I or revision of televisionprograms, videotapes, ] DVDs, andother materials is prohibitedunder ]

the CopyrightLawsof the UnitedStates and ] othercountries,and may subjectyonto civil ]

andcriminal liability.

I

14

Page 14
Image 14
Toshiba Flat Panel Television owner manual Video