Using the POP double-window feature
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time, The
POP program can come from a TV broadcast or an external source,
such as a VCR.
To display a TV broadcast in the POP window:
1. Press SPLIT to display the POP window:
Main
2. Select channds of the POP window in tile following two ways:
• To change to aspecific channels, press POP DIRECT CH.
While "POP" is on _h¢ screen, press the Channel Number
buttons (0-9 and 100).
• To change the next programmed channels, press POP CH
iT.
if the V-CHIP feature is active and you try to watch a TV
program that exceeds your set rating limits, the program will be
blocked (see "Using the V-CHIP menu" on page 44).
To display a picture from an external souive in tire POP window:
1. Connect the cxtern'.d source equipment (see "Connecting your
TV" on page 9).
2. Select tile TV program you want to watch in the main window.
3. Press SPLIT to display the POP window.
4. Repeatedly press SOUR.CE to select the input source for tile POP
window (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1,
or ColorStream HD2 only; you cannot select DVI in POP
mode). The current source will display in purple.
5. _)u can play a tape as the POP picture, or select a channel for the
POP window using the VCR's channel keys.
O-STO
Note:
•TheSPLITbuttons on the remote control
operate the TV'sPOPfeatures
•YoucannotaeeessPOPfeatureswheo
wewingDVI input
•YoucannotdisplaytheANT-2signalsouree
_hthe POPwindo,_z
• Youcanchoosetoflearthesouedofeither
the main or POPprogram Csee"Selecting
theAudio OUTsound" on page 59)
--Channel
Number
-- EXiT
-- SPLIT
-- POPDIRECTOH
-- SOURCE
POP CH AV
NOTICE OFPOSSIBLE ADVERSE
EFFECTSON Plasma display
Avoid displayingstatione0_imageson
your PLasmadisplay for extended periods
oftime, Fixed(non-moving) images
(such as still PIP/POPwindows or black/
gray bars in 4:3screen picture or PiP/
POPfom_ats] can become permanently
e_grained in the Plasmadisplay.This
type of damage is NOT COVERED RY
YOUR WARRANTY becauseit is the
result of misuse,See item 33 on page &
IEI
!i!%:!;!_!!i_i
_iiiiiiiSiiii_!ii!::il
_!_iiiiii!!i!iiiiii:!ii_il
While the above menu is on the screen, you can select the desired
signal input source by pressing the corresponding number button
(0-5).
To close the POP window:
Press SPLIT again or EXIT. 39