Toshiba Flat Panel Television Using the volume lock feature, Operational feature reset

Using the volume lock feature (8000)

For the TX,(CABLE/SAT, VCR, and DVD mode,t, the volmne controls (VOL &l r and MUTE) can be programmed (locked) to the selected device mode. This feature does not apply to the AUDIOI/2

modes.

For example, to lock the volume controls to always jump to tile CABLE/SAT mode:

1.Repeatedly press MODE to select the CABLE/SAT mode.

2.While holding down the RECALL button, press 8 -0-0 -0.

3.Press VOL &.

The Mode indicator will blink two times (locked).

The following table describes in more detail the Volume Lock implementation.

TV CB_SAT VCR DVD AUD] I AUD2 I

'IN 'IN TV AUD1 lAUD2 I BV/S TCB_SAT CBUSAT CBL/SAT AUDI lAUD2 [

VCR VCR ¥CR AUDllAUD2 I

DVD DVD D_) AUDllAUD2 I

AUDI AUD1 AUD1 AUDlfAUDI I

AUD2 AUD2 AUD2 AUD21AUD2 I

To reset the volume controls to the original device code:

1.While holding down the RECALL button, press 8 -0 -0 -0.

2.Press VOL Y.

The Mode indicator will blink four times (unlocked).

Operational feature reset (8900)

This feature clears all _tup features not related m "Device code set up" and resets the Volume Lock to "TV."

To reset tile features:

While holding down the RECALL button, press 8 -9-0 -0.

The Mode indicator will blink two times, and then pause and blink two more times.

Number

MODE

VOL& •

RECALL

23